Ecovacs Robot vacuum Deebot Ozmo 930 DEEBOT cannot return to the Docking Station
What this problem usually means
The robot cannot get back to its Docking Station.
Likely causes
- The Docking Station is not placed properly
- The battery is completely discharged
How to fix it — step by step
- Refer to section 3.2 of the manual to place the Docking Station properly
- If the battery is completely discharged, re-activate it: Power ON, place DEEBOT on the Docking Station by hand, remove after charging for 3 minutes, repeat 3 times, then charge normally
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot Ozmo 930 problems
- DEEBOT gets into trouble while working and stops
- DEEBOT is not able to connect to home Wi-Fi network
- DEEBOT misses cleaning area
- DEEBOT returns to the Docking Station before it has finished cleaning
- DEEBOT will not charge
- DEEBOT will not clean automatically at scheduled time
- The water is not coming out of the Reservoir when DEEBOT is mopping