Ecovacs Robot vacuum Deebot N8 The water is not coming out of the Reservoir when DEEBOT is mopping
What this problem usually means
The mop stays dry because no water is reaching the mopping pad.
Likely causes
- The water inlet filter on the bottom of the Reservoir is clogged
- The Reservoir runs out of water
- The water outlets on the bottom of DEEBOT are clogged
How to fix it — step by step
- Unscrew the water inlet on the bottom of the Reservoir and clean the filter
- Add water into the Reservoir
- Check the water outlets on the bottom of DEEBOT and clean them
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot N8 problems
- AUTO Mode Button flashes RED
- AUTO Mode Button glows a solid RED (low battery)
- DEEBOT cannot return to the Docking Station
- DEEBOT does not clean automatically at the scheduled time
- DEEBOT gets stuck while working and stops
- DEEBOT is making too much noise when cleaning
- DEEBOT is not charging
- DEEBOT misses cleaning spots to be cleaned, or repeats cleaning the area cleaned
- DEEBOT returns to the Docking Station before it has finished cleaning