Ecovacs Robot vacuum Deebot N8 DEEBOT misses cleaning spots to be cleaned, or repeats cleaning the area cleaned
What this problem usually means
Some spots are skipped while other areas are cleaned more than once.
Likely causes
- The cleaning cycle is interfered with by small objects or barriers on the floor
- DEEBOT is working on slippery polished floors
- DEEBOT is unable to reach certain areas blocked by furniture or barriers
- The TrueMapping Distance Sensor is blocked
How to fix it — step by step
- Remove power cords and small objects from the floor; DEEBOT will automatically clean the missed area, so do not move it manually or block its path during the cycle
- Make sure floor wax is dried before DEEBOT starts cleaning
- Tidy up the area by putting furniture and small objects in their proper place
- Remove the objects blocking the TrueMapping Distance Sensor
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot N8 problems
- DEEBOT returns to the Docking Station before it has finished cleaning
- The water is not coming out of the Reservoir when DEEBOT is mopping
- AUTO Mode Button flashes RED
- AUTO Mode Button glows a solid RED (low battery)
- DEEBOT cannot return to the Docking Station
- DEEBOT does not clean automatically at the scheduled time
- DEEBOT gets stuck while working and stops
- DEEBOT is making too much noise when cleaning
- DEEBOT is not charging