Ecovacs Robot vacuum Deebot N8 DEEBOT is not charging
What this problem usually means
The robot is docked but not taking a charge.
Likely causes
- DEEBOT is not switched ON
- DEEBOT has not connected to the Docking Station
- The Power Cord is not connected to the Docking Station
- The Docking Station is not connected to the power supply
- The battery is completely discharged
How to fix it — step by step
- Switch ON DEEBOT
- Make sure the robot's Charging Contacts have connected to the Docking Station Pins
- Make sure the Power Cord is firmly connected to the Docking Station
- Make sure the Docking Station is connected to the power supply
- If the battery is completely discharged, contact ECOVACS Customer Care for help → Shop the battery at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the Battery.
Parts that commonly fix it
- Battery - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot N8 problems
- DEEBOT misses cleaning spots to be cleaned, or repeats cleaning the area cleaned
- DEEBOT returns to the Docking Station before it has finished cleaning
- The water is not coming out of the Reservoir when DEEBOT is mopping
- AUTO Mode Button flashes RED
- AUTO Mode Button glows a solid RED (low battery)
- DEEBOT cannot return to the Docking Station
- DEEBOT does not clean automatically at the scheduled time
- DEEBOT gets stuck while working and stops
- DEEBOT is making too much noise when cleaning