Dyson Robot vacuum Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 33 problems covered.
Shop Dyson Robot vacuum parts at Amazon
All Robot vacuum codes across brands →
Finding your model number: it is on the underside label or in the app.
360 Eye
All Dyson 360 Eye codes & guides → (5 covered)
- 5 red flashing lights — 5 red flashing lights is the 360 Eye's general fault signal. Dyson documents three causes - a critically low battery, a software crash…
- Connectivity issues (solid Wi-Fi light) — If the Wi-Fi light is solid, the robot has detected that it can't log into the network.
- One red fault light displayed — The robot uses a Dyson digital motor with its own blockage protection. When the motor detects a blockage it will pulse a number of times to…
- Red battery light flashing — Red battery light flashing indicates that your robot cannot complete the clean. Please return your robot to the dock.
- Two red fault lights displayed — Two red fault lights: check the brush bar and tracks.
360 Vis Nav
All Dyson 360 Vis Nav codes & guides → (28 covered)
- Airways blocked — Your robot has detected a blockage in the airways, that may require the bin to be emptied.
- Ambient temperature too low — Your robot's internal temperature is too cold to clean.
- Battery low. Place on dock. — The battery is low and the robot needs charging.
- Battery not detected — The robot cannot detect its battery.
- Bin not detected — The robot cannot detect its bin; it won't clean if the bin is missing or incorrectly fitted.
- Brush bar motor too hot — The brush bar motor's internal temperature is too high; the robot monitors temperature and stops outside normal limits.
- Brush bar stuck — The brush bar has stopped spinning.
- Check bin level — Your robot has detected that the bin is full, or there is a blockage in the airways, that may require the bin to be emptied.
- Drop sensors obscured — The drop sensors need cleaning.
- Edge cleaner stuck — The edge cleaner is blocked.
- Filter not detected — The robot cannot detect its filter; it won't clean if the filter is missing or incorrectly fitted.
- IMU data error — The robot received no data from its IMU (inertial measurement unit).
- Large drop detected — The robot couldn't navigate away from a drop. (Dyson support FAQ; grouped with the Vis Nav fault set.)
- Optics obscured — The camera and sensors need cleaning.
- Place on dock — Your robot has a problem and needs you to place it on the dock.
- Robot lifted — Your robot has detected that it has been lifted, or cannot move away from a drop.
- Robot moved — Your robot has detected that it has been moved.
- Robot stuck — Your robot is unable to move.
- Robot temperature too high — Your robot's internal temperature is too hot to clean.
- Routine check — Your robot needs you to do a routine check of its systems.
- System error detected — Your robot has detected a system error.
- Unable to dock — Your robot has been unable to dock.
- Unable to return to dock — Your robot has been unable to return to its dock.
- Unhandled alert — The low-level software platform has detected a problem without a specific fault code, so a generic fault is shown.
- Vacuum calibration missing — Your robot detected that its vacuum motor calibration is missing. Dyson describes this as likely a temporary software issue.
- Wash filter — Your robot has detected a blockage in the airways, that may require the filter to be washed.
- Wheel motor too hot — The wheel motor's internal temperature is too high; the robot monitors temperature and stops outside normal limits.
- Wheel stuck — A wheel is stuck or entangled.