Dyson Robot vacuum 360 Vis Nav System error detected
What this problem usually means
Your robot has detected a system error.
Likely causes
- System (software) error detected
How to fix it — step by step
- To power off, press and hold the screen until the Power off menu appears, then press and click the LCD touchscreen to confirm
- Place your robot on the dock to turn the power on again
- In Settings on the MyDyson app, check your robot's software is up to date and automatic upgrades are enabled
- If you're unable to clear the alert, call the Dyson Helpline
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.