Dyson Robot vacuum 360 Eye Connectivity issues (solid Wi-Fi light)
What this problem usually means
If the Wi-Fi light is solid, the robot has detected that it can't log into the network.
Likely causes
- Robot cannot log into the home Wi-Fi network
- Weak Wi-Fi signal at the dock
- Router or home connection problem
How to fix it — step by step
- Check your home Wi-Fi connection is working
- Power cycle the robot to reset the Wi-Fi: place it on the charging dock so the battery light illuminates, lift it off for 10 seconds, then place it back on the dock and refresh the Dyson Link app
- Keep the router and charging dock in close proximity
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.