Dyson Robot vacuum 360 Vis Nav Robot stuck
What this problem usually means
Your robot is unable to move.
Likely causes
- Robot obstructed or boxed in by obstacles
How to fix it — step by step
- Pick the robot up and move it away from any obstruction
- Press and click the LCD touchscreen to resume the clean
- Set up a restriction in the MyDyson app if this alert continues to happen in a specific area
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.