Dyson Air purifier Pure Humidify+Cool PH02 Wrong PSU warning

What this problem usually means

The machine displays a warning graphic and will not operate when a third-party power supply unit (PSU) is used.

Likely causes

  1. Third-party / non-Dyson power supply unit connected

How to fix it — step by step

  1. Use only the power supply unit provided with the machine.
  2. Check the electrics, plug and cord for damage.
  3. Make sure the cable is firmly plugged into the back of the machine.

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Dyson Air purifier Pure Humidify+Cool PH02 problems

See all Dyson Pure Humidify+Cool PH02 codes & guides →