Dyson Air purifier Pure Humidify+Cool PH02 Filter replacement alert
What this problem usually means
The LCD screen alerts you when the filters need changing.
Likely causes
- Filters have reached the end of their service life
How to fix it — step by step
- Switch off and unplug the machine.
- Release the shrouds and push the tabs at the top and bottom to release the filters. Dispose of the used filters.
- Remove all packaging from the new filters and push them into the shrouds until the tabs click into place.
- Position the shrouds on the base until they click into place.
- Plug the machine in and press Standby to switch it on.
- Reset the filter life: press and hold the Night mode button on the remote control. The LCD counts down from five to the default screen and the filter level is reset.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Dyson replacement filters.
Parts that commonly fix it
- Dyson replacement filters - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.