Dyson Air purifier Pure Humidify+Cool PH02 Alert triangle (continuous)
What this problem usually means
A continuous alert triangle shows on the display - a general fault alert on the machine.
Likely causes
- Machine fault condition (Dyson's documented first response is a power reset)
How to fix it — step by step
- Switch off and unplug the machine.
- Leave the machine for 10 seconds.
- Plug the machine back in and switch it on.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.