Dyson Air purifier Pure Humidify+Cool PH02 Deep clean cycle alert
What this problem usually means
The machine alerts you when a Deep clean cycle is needed to remove limescale: you get a notification in the MyDyson app if the machine is connected; otherwise the LCD screen alerts you and the Deep clean cycle button lights up.
Likely causes
- Limescale build-up in the evaporator from humidifier use
How to fix it — step by step
- Press the Deep clean cycle button and follow the instructions on the LCD screen.
- Press the Shroud release buttons to remove the shrouds; the inner door will spring open.
- Press the Water tank release buttons to remove the water tank. Unclip the cap, remove the evaporator and place it in the tank, then refit the cap.
- Fill the tank halfway to the Max line with cold tap water.
- Add 150g of citric acid powder and agitate gently until it has dissolved.
- Place the evaporator in the tank, fill the tank to Max, replace the cap and secure the clips, and wipe off any excess water.
- Slide the tank into the machine until it clicks into place.
- When prompted, press the Deep clean cycle button. The cycle runs and the LCD shows a countdown timer.
- When the cycle is complete, remove the tank, rinse the evaporator under a cold tap, rinse the tank and wipe the inside clean, then refill the tank to Max and replace the cap.
- Push the evaporator back into the machine securely, close the inner door, replace the shrouds, and slide the tank back in until secure.
- To cancel the cycle at any point, press and hold the Deep clean cycle button for 5 seconds.
- Keep the tank lid dry - it contains power connections. If it gets wet, wipe it dry and let it dry completely before refitting.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.