Amana Washer Top-Load HE OL Error Code
What the OL code means
The washer load was too large. If an overload is detected, the washer drains any water and detergent in the washer.
Likely causes
- Basket packed beyond capacity
- Too many bulky or absorbent items in one load
How to fix it — step by step
- Remove several items from the load
- Add HE detergent as directed after the washer drains
- Close the lid
- Press Start/Pause to restart the cycle
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the OL code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Amana manual is on Amana's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.