Amana Top-Load HE Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 8 codes covered.
Shop Amana Top-Load HE parts at RepairClinic or Amazon
- drn — The washer is not draining properly. Amana notes this can sometimes be an installation problem with the drain hose.
- HC — The hot and cold inlet hoses have been installed incorrectly (reversed): the cold hose is on the hot inlet and the hot hose is on the cold…
- LdL — The lid is not locking, so the cycle cannot proceed.
- LdU — The lid cannot unlock. The washer detects objects on top of the lid preventing it from unlocking.
- lid — The washer lid was left open. If it stays open for more than 10 minutes, the cycle resets and the water in the washer drains out.
- Ofb — The washer load is out of balance. The washer runs a load-balance correction routine to try to rebalance it.
- OL — The washer load was too large. If an overload is detected, the washer drains any water and detergent in the washer.
- PF — The wash cycle was interrupted by a power failure.