Amana Washer Top-Load HE HC Error Code

What the HC code means

The hot and cold inlet hoses have been installed incorrectly (reversed): the cold hose is on the hot inlet and the hot hose is on the cold inlet. The code appears at the end of the wash cycle.

Likely causes

  1. Hot and cold hoses swapped at installation
  2. Hoses moved and reconnected incorrectly

How to fix it — step by step

  1. Turn off the water supply
  2. Reverse the hoses so hot connects to hot and cold to cold
  3. Turn the water back on and check for leaks
  4. Run another cycle to verify the hoses are correct

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the HC code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Amana manual is on Amana's support site — you'll need your model number.

Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.

Related Amana Washer Top-Load HE error codes

See all Amana Top-Load HE codes & guides →