Whirlpool Washer Front-Load and Top-Load HE Sud Error Code

What the Sud code means

Excessive suds: there are too many suds in the washer, so it extends rinsing and may not spin out properly. Also shown as Sd on some models.

Likely causes

  1. Too much detergent
  2. Non-HE detergent used
  3. No-splash/easy-pour bleach creating extra suds
  4. Restricted drain hose or standpipe

How to fix it — step by step

  1. Use only HE detergent and reduce the amount
  2. Let the washer finish its automatic suds-reduction rinsing
  3. Check the drain hose is not kinked or clogged
  4. Use regular liquid bleach instead of no-splash bleach if suds persist

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the Sud code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Whirlpool manual is on Whirlpool's support site — you'll need your model number.

Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.

Related Whirlpool Washer Front-Load and Top-Load HE error codes

See all Whirlpool Front-Load and Top-Load HE codes & guides →