Toyota Wagon Sienna Transmission failure and slipping
What this problem usually means
CarBuzz's Sienna buyer's guide, compiled from NHTSA, RepairPal and CarComplaints data, lists transmission failures among the first- and second-generation vans' common problems. The symptoms are rough shifting, slippage, or gears not shifting up on the early vans, and delayed shifting, gear slippage and fluid leaks on the 2004-2010 generation.
Likely causes
- worn automatic transmission internals → Shop the automatic transmission at Amazon
- transmission fluid leaks
How to fix it — step by step
- Note whether the slipping or delayed shifts happen hot, cold or under load
- Have the transmission fluid level and condition checked and look for leaks
- Have stored codes read - some shift faults are control problems rather than a failed gearbox
- Have a transmission shop evaluate the unit before it fails completely; internal repairs are professional work
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the automatic transmission.
Parts that commonly fix it
- automatic transmission - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.