Toyota Wagon Sienna Power sliding door stops working
What this problem usually means
On RepairPal, the Sienna's motorized sliding door is the most commonly reported problem - reported four times as often as the next most common problem and found in every model year. Most owners had problems because the cable inside the door frayed or completely broke, while others had a worn-out electric motor; once the mechanism breaks the door has to be opened manually, and dealer repair quotes around $1,500 to over $2,000 were common.
Likely causes
- frayed or broken sliding door cable
- worn-out sliding door motor → Shop the sliding door motor at Amazon
How to fix it — step by step
- Cycle both sliding doors several times and listen for grinding, hesitation or a cable dragging → Shop the sliding door cable at Amazon
- Check whether the door works manually - a door that only fails under power points to the cable or motor
- Inspect the visible cable run for fraying before the door jams completely
- Have the frayed cable or failed motor replaced; get a firm quote first, as dealer prices run high
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the sliding door cable.
Shop the sliding door cable at Amazon
Also tied to this fault: sliding door motor - Shop at Amazon
Parts that commonly fix it
- sliding door cable - Shop at Amazon
- sliding door motor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.