Toyota Truck Tundra Power door locks malfunction
What this problem usually means
People who drive a 2014 Toyota Tundra have complained about faulty door locks. The common fix is replacing the locks or the actuators, and some owners have had to get a power lock actuator replaced twice in a month.
Likely causes
- failed door lock actuator
- faulty door lock
How to fix it — step by step
- Test every door with both the fob and the interior switch to find which locks fail
- Listen for a weak buzz or partial movement from the suspect door, which points to its actuator
- Check the child-lock and lock settings before buying parts
- Replace the failed door lock actuator in the affected door and re-test all locks → Shop the door lock actuator at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the door lock actuator.
Parts that commonly fix it
- door lock actuator - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.