Toyota Truck Tundra Lower ball joint premature wear
What this problem usually means
Toyota issued two separate recalls covering 533,000 trucks and SUVs because of faulty lower ball joints, and the Tundra was among them. The bad ball joints in the front suspension were prone to premature wear, causing difficulty steering and other suspension problems, and could lead to accidents on the road.
Likely causes
- prematurely worn lower ball joints
How to fix it — step by step
- Check the VIN for the ball joint recalls and confirm the work was completed
- Note any steering difficulty, wandering or front suspension noise
- Have the ball joints checked for play on a lift - do not keep driving on a loose joint
- Replace worn lower ball joints and have the alignment checked afterwards → Shop the lower ball joints at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the lower ball joints.
Parts that commonly fix it
- lower ball joints - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.