Toyota Truck Tundra Engine stalls from fuel pump failure

What this problem usually means

Fuel pump malfunction is a common issue among Toyota vehicles, and Tundras manufactured from 2018 to 2020 are likely included in the 2020 recall of DENSO fuel pumps that were causing vehicles to stall. Toyota requires replacement of the faulty pump in affected models, which is free at a dealer for covered trucks.

Likely causes

  1. failing denso low-pressure fuel pump covered by recall

How to fix it — step by step

  1. Check the VIN at nhtsa.gov/recalls or with a Toyota dealer for the fuel pump recall before paying for diagnosis → Shop the fuel pump at Amazon
  2. Note whether the stall happens hot, cold or at random, and whether the truck restarts
  3. Book the free dealer pump replacement if the recall is open on the truck
  4. If the recall does not apply, have fuel pressure tested before replacing the pump on suspicion

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Toyota Truck Tundra problems

See all Toyota Tundra codes & guides →