Toyota SUV Highlander Oil leak and loss of oil pressure from VVT-i oil line

What this problem usually means

The Highlander's 3.5-liter 2GR-FE V6 shipped with an oil-supply line to the variable valve timing system that included a short rubber section, fitted to engines built through roughly April 2008, which puts certain 2008 Highlanders in scope. That rubber hardens and can rupture, letting the engine pump its entire oil supply onto the road in well under a minute; Toyota's Limited Service Campaign E0G replaced it with an all-metal line, but that campaign has expired.

Likely causes

  1. hardened rubber section in the vvt-i oil supply line → Shop the vvt-i oil supply line at Amazon
  2. rubber oil-cooler line on tow-package cars

How to fix it — step by step

  1. Stop the engine immediately if the oil warning light comes on or you smell oil and see a pool under the car
  2. Open the hood and check behind the oil-fill area whether the VVT-i line is the original rubber design or the updated metal one
  3. Do not drive the car until the line is dealt with - a few miles without oil pressure destroys the engine
  4. Have the updated all-metal oil line fitted if the rubber line is still present

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Toyota SUV Highlander problems

See all Toyota Highlander codes & guides →