Toyota SUV Highlander Engine misfire from failed ignition coil

What this problem usually means

Ignition coils on 2001-2013 Highlanders cause the classic misfire-and-jerk complaints as the cars age. The fault is diagnosable in minutes by reading the cylinder-specific misfire code and swapping the suspect coil.

Likely causes

  1. failed ignition coil

How to fix it — step by step

  1. Have the stored codes read and note which cylinder is misfiring
  2. Swap the suspect coil with a neighboring cylinder's coil and see whether the misfire code moves with it
  3. Inspect the spark plug in the misfiring cylinder while the coil is off
  4. Replace the failed ignition coil and clear the codes, then road-test → Shop the ignition coil at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Toyota SUV Highlander problems

See all Toyota Highlander codes & guides →