Toyota SUV Highlander Coolant leak from water pump weeping
What this problem usually means
The 2GR V6's water pump commonly weeps around 100,000 to 120,000 miles on the Highlander. A slow coolant loss with crusty residue at the pump is the early warning; ignored, it can progress to overheating.
Likely causes
- worn water pump seals
How to fix it — step by step
- Check the coolant level cold and look for pink crusty residue around the water pump → Shop the water pump at Amazon
- Top up only with the specified coolant and monitor how fast the level drops
- Have the cooling system pressure-tested to confirm the pump is the leak source
- Replace the water pump if it is weeping, and re-check the level after a few heat cycles
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the water pump.
Parts that commonly fix it
- water pump - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.