Toyota SUV 4Runner Engine misfires and hesitation from failed mass air flow sensor
What this problem usually means
Owners of 1996-2002 4Runners, with similar complaints on 2012 models, report random cylinder misfires, hesitation, poor acceleration, bucking, stalling and generally poor engine performance traced to a faulty mass air flow (MAF) sensor. Cleaning the sensor sometimes fixes it; otherwise it is replaced.
Likely causes
- dirty or failed mass air flow sensor
How to fix it — step by step
- Have the stored codes read - a MAF fault usually leaves evidence
- Inspect the sensor element for dirt or oil contamination
- Clean the sensor with dedicated MAF cleaner and road-test
- Replace the mass air flow sensor if the misfires and hesitation persist → Shop the mass air flow sensor at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the mass air flow sensor.
Parts that commonly fix it
- mass air flow sensor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.