Toyota SUV 4Runner Automatic transmission not shifting properly
What this problem usually means
Automatic transmission problems are common on 4Runners built from 1990-2011 and in 2016, showing up as rough shifting, a refusal to shift into overdrive, or no shift into drive on start-up, usually between 25,000 and 150,000 miles. In most cases a shift solenoid or a faulty throttle position sensor is to blame, and a complete overhaul is not necessary.
Likely causes
- failed shift solenoid
- faulty throttle position sensor
How to fix it — step by step
- Note exactly when the bad shift happens - cold start, highway speed, or every gear change
- Have the transmission fluid level and condition checked
- Have a shop test the shift solenoids and throttle position sensor before authorizing a rebuild → Shop the throttle position sensor at Amazon → Shop the shift solenoid at Amazon
- Replace the failed solenoid or sensor and road-test through all gears including overdrive
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the shift solenoid.
Shop the shift solenoid at Amazon
Also tied to this fault: throttle position sensor - Shop at Amazon
Parts that commonly fix it
- shift solenoid - Shop at Amazon
- throttle position sensor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Toyota manual is on Toyota's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.