Sundance Spas Hot tub ---- (Watchdog)

What this problem usually means

On Sundance Spas 880 Series hot tubs, ---- is the Watchdog display: the hot tub is deactivated because water temperature is above acceptable limits and a problem has been detected that could damage the hot tub or its components. Do not enter the water.

Likely causes

  1. extreme overheat
  2. failed temperature or high-limit sensor
  3. heater or control fault

How to fix it — step by step

  1. Do not enter the water
  2. Remove the hot tub cover to speed cooling
  3. Turn power off at the breaker
  4. Contact your Sundance Spas dealer or a qualified spa technician before using the spa again

Parts that commonly fix it

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Sundance Spas hot tub problems

See all Sundance Spas hot tub codes & guides →