Sundance Spas Hot tub FL--1 Error Code

What the FL--1 code means

On Sundance Spas 780 Series hot tubs, FL--1 (FLOW ERROR OPEN) means the flow switch is malfunctioning open, the filter cartridge is excessively dirty, or an air lock has occurred at the circulation pump intake. The heater deactivates and Jets Pump 1 may also deactivate.

Likely causes

  1. excessively dirty filter cartridge
  2. air lock at the circulation pump intake
  3. low water level
  4. malfunctioning flow switch

How to fix it — step by step

  1. Verify water level is above all jets but below the lowest pillow and add water if needed
  2. Turn power off and remove and clean the filter cartridge
  3. Purge the air lock per the manual: remove the filter, hold a garden hose sealed with a rag over the filter wall fitting, run water 30 seconds, then reinstall the filter
  4. If the circulation pump is not running, cycle power at the main breaker to reset its priming cycle
  5. If the problem persists, contact your Sundance Spas dealer or a qualified spa technician

Parts that commonly fix the FL--1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Sundance Spas hot tub error codes

See all Sundance Spas hot tub codes & guides →