Sundance Spas Hot tub 780 Series SN--1 Error Code
What the SN--1 code means
On Sundance Spas 780 Series hot tubs, SN--1 means the high-limit temperature sensor is not functioning - an open sensor disables the heater and a shorted sensor deactivates the spa.
Likely causes
- open high-limit sensor → Shop the high-limit sensor at RepairClinic
- shorted high-limit sensor
- damaged sensor wiring
How to fix it — step by step
- Turn power off at the breaker and leave the spa off
- Do not use the hot tub while SN--1 is showing
- Contact your Sundance Spas dealer - the manual states your authorized dealer must repair this
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the high-limit sensor.
Parts that commonly fix the SN--1 code
- high-limit sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.