Subaru SUV Ascent PTC heater fire risk
What this problem usually means
A recall covering 2019 to 2022 Ascents addresses a ground bolt securing the ground terminal of the Positive Temperature Coefficient heater that may have been improperly fastened. The terminal can melt and damage surrounding components, increasing the risk of fire, and owners were advised to park away from structures and not leave the vehicle unattended while the engine is running until repaired.
Likely causes
- improperly fastened ptc heater ground bolt
How to fix it — step by step
- Park outside and away from buildings, and do not leave the vehicle unattended while the engine is running, until the recall is done
- Stop driving and move away from the vehicle if you smell melting plastic or see smoke near the dash
- Check by VIN whether recall 22V907000 applies to your Ascent
- Have a dealer complete the PTC heater ground bolt recall repair free of charge → Shop the ptc heater at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the ptc heater.
Parts that commonly fix it
- ptc heater - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.