Subaru SUV Ascent PCV valve separation

What this problem usually means

A 2019 Ascent recall involves faulty PCV valves that can separate and be sucked into the engine, resulting in sudden power loss or total engine failure. In severe cases Subaru replaced entire short-block engines under warranty.

Likely causes

  1. faulty pcv valve separating

How to fix it — step by step

  1. Stop driving and park safely if the engine knocks, stalls, or suddenly loses power
  2. Do not restart an engine that has lost power with a check engine light until it is inspected
  3. Check by VIN whether the PCV valve recall applies to your Ascent → Shop the pcv valve at Amazon
  4. Have a dealer replace the PCV valve and inspect or replace the engine if components entered it

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Subaru manual is on Subaru's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Subaru SUV Ascent problems

See all Subaru Ascent codes & guides →