Speed Queen Washer FF Front-Load Er do
What this problem usually means
Door opened error on Speed Queen front-load washers: the control detected the door being opened during a cycle.
Likely causes
- Door opened or not latched during the cycle
- Door latch not engaging fully
- Faulty door switch
How to fix it — step by step
- Close the door firmly until it latches
- Check nothing is trapped between the door and the seal
- Restart the cycle
- Call for service if Er do appears with the door closed and latched
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the door lock.
Parts that commonly fix it
- door lock - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Speed Queen manual is on Speed Queen's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.