Sony TV Won't Turn On
What this problem usually means
A Sony Bravia TV that will not turn on — no picture, and possibly no standby light or a blinking red standby light — is most often suffering a temporary power/software fault that a power reset clears, or, if a red blink pattern repeats, a board-level fault identified by the blink count. Sony's official guidance is to try a restart/power reset first, then a factory data reset, then a forced factory reset as a last resort on Android TV/Google TV models.
Likely causes
- Temporary software hang or error data held in memory
- Faulty power strip or surge protector
- Failed power supply board (commonly shows as a 2-blink code)
- Failed main board → Shop the main board at RepairClinic
- Dead remote control batteries masking a working TV
How to fix it — step by step
- Try the power button on the TV itself to rule out the remote, and check the wall outlet with another device; plug the TV directly into the wall, bypassing any power strip
- Power reset: turn the TV off, unplug the power cord, leave it without power for two minutes (one minute on older non-Android models per Sony's older procedure), then plug back in and turn on — on some Google TV models holding POWER on the TV for about 40 seconds also performs a power reset
- Disconnect all external devices and USB drives and retry
- Count any repeating red LED blinks and use the blink code for your model — most red blink conditions require service
- If the TV responds but misbehaves, do a factory data reset from Settings; if you cannot access the menu or have no remote, do a forced factory reset: unplug the TV, hold POWER and Volume Down on the TV while plugging it back in, and release when the LED turns white/green (button combination varies by model)
- If there is no standby light at all after these steps, the power supply board has likely failed completely and needs service → Shop the power supply board at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the power supply board.
Shop the power supply board at RepairClinic or Amazon
Also tied to this fault: main board - Shop at RepairClinic or Amazon
Parts that commonly fix it
- power supply board - Shop at RepairClinic or Amazon
- main board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.