Sony TV 7 Blinks

What it should look like on your machine

then it repeats

7 blinks - then the pattern repeats. Count along with your machine and compare.

What this problem usually means

The red standby LED blinks seven times, pauses, and repeats, indicating a temperature / thermal error — the main board is overheating — or a short on the power supply or main board on Sony Bravia LCD/LED models. Blink meanings vary by model and generation, so always confirm against your exact model's service documentation.

Likely causes

  1. Main board overheating due to blocked ventilation
  2. Internal dust buildup restricting airflow
  3. Faulty temperature sensor on the main board
  4. Short circuit on the power supply board or main board

How to fix it — step by step

  1. Turn the TV off and let it cool completely, then check that vents are clear and the TV has space around it for airflow
  2. Perform a power reset: unplug the TV for 2 minutes, then plug back in and retest
  3. Unplug the TV, wait at least 5 minutes, remove the back cover and clear internal dust with compressed air
  4. Visually inspect the power supply board and main board for burnt components or short circuits → Shop the power supply board at RepairClinic → Shop the main board at RepairClinic
  5. If the code returns in a cool, well-ventilated setup, have the main board or power supply board replaced by a technician

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Sony TV problems

See all Sony TV codes & guides →