Shark Robot vacuum AI Robot Series CLEAN (WHITE) + ! (RED) flashing
What this problem usually means
Error number 2 in the Shark AI Robot (RV2500/AV2501-series) manual: blockage in brushroll. Shown by CLEAN white and ! red flashing. The same manual also lists CLEAN (RED) + ! (RED) alternating for a brushroll blockage; IQ and EZ models use a CLEAN blue + ! pattern instead — see the IQ / EZ Series entry.
Likely causes
- Hair, string or carpet fibres wrapped around the brushroll
- Object jammed in the brushroll housing
- Debris inside the brushroll
How to fix it — step by step
- Turn the robot off and turn it over
- Remove the brushroll and pull off all hair and debris from around and inside it
- Clear the brushroll housing, then refit the brushroll
- Restart cleaning
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Shark manual is on Shark's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.