Shark Robot vacuum AI Robot Series CLEAN (RED) + DOCK (WHITE) alternating
What this problem usually means
Error number 16 in the Shark AI Robot (RV2500/AV2501-series) manual: the robot is stuck. Shown by CLEAN red and DOCK white alternating. IQ and EZ models show the same Error 16 with DOCK blue instead of white — see the IQ / EZ Series entry.
Likely causes
- Robot wedged under furniture or between objects
- Robot trapped by cords, rug edges or clutter
- Front bumper held in so the robot cannot free itself
How to fix it — step by step
- Free the robot by hand
- Move it to a new location on a level surface
- Make sure the front bumper moves in and out freely
- Restart cleaning
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Shark manual is on Shark's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.