Samsung Washer nF1 Error Code

What the nF1 code means

Hot/cold error: the cold water supply is extremely hot because the hoses are swapped. Samsung lists nF1 with 4C2, 4E2 and CE.

Likely causes

  1. Hot and cold supply hoses swapped at the inlets
  2. Cold inlet connected to a hot supply
  3. Incoming water too hot for the selected delicate or wool cycle

How to fix it — step by step

  1. Turn off both supply taps
  2. Reconnect the hoses so cold (usually blue) goes to the cold inlet and hot (usually red) to the hot inlet
  3. Run a rinse cycle to confirm the code clears
  4. If the hoses were already correct, check that the cold tap is not supplying hot water

Parts that commonly fix the nF1 code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung washer error codes

See all Samsung washer codes & guides →