Samsung Washer SE Error Code
What the SE code means
No-drain error: water is not draining at the correct speed, or at all. Samsung lists SE in the same group as 5C, 5E, SC and nd (the 5 can look like an S on the display).
Likely causes
- Clogged debris / pump filter
- Kinked, clogged or frozen drain hose
- Drain hose installed too low, too high or pushed too far into the standpipe
- Object lodged in the drain pump
- Failed drain pump
How to fix it — step by step
- Unplug the washer and, on front-load models, drain via the emergency hose and clean the debris filter
- Check the drain hose for kinks and blockages and straighten it to the drain
- Make sure the drain hose is at the correct height and not sealed airtight in the standpipe
- Remove any coins, lint or small items found in the filter housing
- Plug back in and run a spin cycle to drain remaining water
Parts that commonly fix the SE code
- drain pump - Shop at RepairClinic
- drain hose - Shop at RepairClinic
- debris filter - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.