Samsung Washer SC Error Code

What the SC code means

No-drain error: water is not draining at the correct speed, or at all. Samsung lists SC in the same group as 5C, 5E, SE and nd.

Likely causes

  1. Clogged debris / pump filter
  2. Kinked, clogged or frozen drain hose
  3. Drain hose installed too low, too high or pushed too far into the standpipe
  4. Object lodged in the drain pump
  5. Failed drain pump

How to fix it — step by step

  1. Unplug the washer and, on front-load models, drain via the emergency hose and clean the debris filter
  2. Check the drain hose for kinks and blockages and straighten it to the drain
  3. Make sure the drain hose is at the correct height and not sealed airtight in the standpipe
  4. Remove any coins, lint or small items found in the filter housing
  5. Plug back in and run a spin cycle to drain remaining water

Parts that commonly fix the SC code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung washer error codes

See all Samsung washer codes & guides →