Samsung Washer CE Error Code

What the CE code means

Hot/cold error: the cold water supply is extremely hot, which Samsung lists with 4C2 and 4E2 and says usually means the supply hoses are swapped.

Likely causes

  1. Hot and cold supply hoses swapped at the inlets
  2. Cold inlet connected to a hot supply
  3. Incoming water too hot for the selected delicate or wool cycle

How to fix it — step by step

  1. Turn off both supply taps
  2. Reconnect the hoses so cold (usually blue) goes to the cold inlet and hot (usually red) to the hot inlet
  3. Run a rinse cycle to confirm the code clears
  4. If the hoses were already correct, check that the cold tap is not supplying hot water

Parts that commonly fix the CE code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Samsung washer error codes

See all Samsung washer codes & guides →