Roborock Robot vacuum Error 4
What this problem usually means
Cliff sensor error. The drop sensors on the underside are dirty or are reading a drop, so the robot will not move for safety.
Likely causes
- Cliff sensors dirty or dusty
- Robot placed too close to stairs or a drop
- Dark flooring confusing the cliff sensors
How to fix it — step by step
- Wipe all the cliff sensors on the underside with a clean, dry cloth
- Move the robot away from drops, stairs and edges
- Place it on level floor in the middle of the room
- Restart cleaning
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.