Raypak Pool heater Clock/Fireman Sw

What this problem usually means

On Raypak Digital gas pool heaters (206A-406A), Clock/Fireman Sw means there is an open circuit at the time clock or fireman switch wired to the heater, so the heater is being held off externally.

Likely causes

  1. time clock in an off period or switched off
  2. fireman switch open
  3. remote controller holding the heater off
  4. broken wire in the clock/fireman circuit

How to fix it — step by step

  1. Check the time clock is on and set to the correct time
  2. Check any fireman switch or remote controller is calling for heat
  3. Check for an obviously tripped breaker
  4. If the clock and switches are on and the message stays, call a pool technician or electrician

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Raypak pool heater problems

See all Raypak pool heater codes & guides →