RAM Truck 2500 Transmission slipping
What this problem usually means
On Ram 2500s with the 6.7L Cummins and 68RFE six-speed automatic, slipping or flaring shifts - engine RPM spiking during a shift without a matching increase in speed - are a classic sign of worn clutches. The overdrive clutch pack is a known weak point, especially when towing heavy loads in 6th gear or with power-increasing tunes, and can overheat and warp.
Likely causes
- Worn transmission clutches
- Overdrive clutch pack overheating and warping under heavy towing or added power
- Dark, burnt transmission fluid from internal clutch wear and heat damage
How to fix it — step by step
- Check transmission fluid level and condition; dark brown or black fluid that smells burnt indicates severe internal wear
- Note whether RPM flares on the 4-5 or 5-6 shift or under towing load
- Stop towing and have the transmission diagnosed promptly, as continued slipping destroys the clutch packs → Shop the transmission clutch pack at Amazon
- Repair is internal transmission work - rebuild or replacement with upgraded overdrive clutches - and is a professional job → Shop the transmission rebuild kit at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the transmission rebuild kit.
Shop the transmission rebuild kit at Amazon
Also tied to this fault: transmission clutch pack - Shop at Amazon
Parts that commonly fix it
- transmission rebuild kit - Shop at Amazon
- transmission clutch pack - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.