RAM Truck 2500 Transmission overheating when towing

What this problem usually means

The 68RFE running hotter than normal, especially when towing, is a major warning sign; heat is described as the primary killer of these transmissions. Overheating accompanies overdrive clutch failure and burnt, oxidized fluid, and high temperatures cook the fluid and accelerate clutch wear.

Likely causes

  1. Heat build-up under sustained towing load
  2. Overdrive clutches shedding heat poorly and warping
  3. Burnt, oxidized transmission fluid losing its protective properties

How to fix it — step by step

  1. Monitor transmission temperature while towing and back off or stop if it runs hotter than normal
  2. Check fluid level and condition; dark or burnt-smelling fluid needs professional attention
  3. Have the cooling system and valve body checked, and ask about a deep sump pan or thermal bypass upgrade for towing use
  4. Internal damage from overheating means rebuild-level work, which is a professional job

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related RAM Truck 2500 problems

See all RAM 2500 codes & guides →