RAM Truck 2500 Transmission shuddering at low speed
What this problem usually means
A vibration or shudder felt at low speeds, often around 40-50 mph and especially during torque converter lock-up, points to a failing torque converter clutch in the 68RFE. The factory torque converter clutch can degrade under heavy loads, causing shuddering and inconsistent lock-up and sending damaging debris through the transmission.
Likely causes
- Degrading torque converter clutch in the 68RFE
- Inconsistent torque converter lock-up under load
How to fix it — step by step
- Note the speed and load when the shudder occurs, especially around 40-50 mph at lock-up
- Check transmission fluid for burnt smell or debris
- Have the converter diagnosed before debris contaminates the whole transmission
- Fix is torque converter replacement, upgraded single or triple-disc units being the common preventative choice - a professional job → Shop the torque converter at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the torque converter.
Parts that commonly fix it
- torque converter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.