OBD-II Car P0303 Error Code
What the P0303 code means
Cylinder 3 Misfire Detected: the engine computer has determined cylinder #3 is not firing properly. The diagnostic path is the same as for any single-cylinder misfire - prove whether it's spark, fuel, or compression with swap tests before replacing parts.
Likely causes
- Worn or fouled spark plug, or damaged plug wire/boot on cylinder 3
- Failed ignition coil for cylinder 3
- Clogged or failed fuel injector for cylinder 3
- Vacuum leak near cylinder 3's intake port
- Low compression on cylinder 3 - burned exhaust valve or worn rings (test last)
How to fix it — step by step
- Inspect cylinder 3's spark plug and compare it with a plug from a healthy cylinder - replace the set if they're worn or overdue
- Swap cylinder 3's ignition coil with another cylinder's, clear the code, and drive: a code that follows the coil condemns the coil
- Check the cylinder 3 injector - listen for clicking and swap-test it if spark is proven good
- Look and listen for vacuum leaks around the intake manifold near cylinder 3
- Run a compression test if spark and fuel check out; significantly low compression on #3 means internal engine repair
Parts that commonly fix the P0303 code
- spark plug - Shop at Amazon
- ignition coil - Shop at Amazon
- fuel injector - Shop at Amazon
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.