Nissan SUV Rogue Timing chain rattling on cold start

What this problem usually means

On the 2014-2021 Rogue's 2.5L QR25DE engine, the timing chain stretches over time, especially on engines run low on oil. The hydraulic tensioner loses pressure, the chain develops slack and cam timing drifts, setting codes such as P0011 and P0014; a rattling noise on cold start that fades after a few seconds is the early warning, because the chain is slack until the tensioner pumps up with oil pressure.

Likely causes

  1. stretched timing chain → Shop the timing chain at Amazon
  2. hydraulic timing chain tensioner losing pressure, worsened by low oil level

How to fix it — step by step

  1. Check the oil level before diagnosing - a Rogue that is quarts low on oil can rattle for that reason alone
  2. Top up with the specified oil, run a heat cycle and recheck the rattle on the next cold start
  3. Scan for cam timing codes P0011 or P0014
  4. If the rattle persists at the correct oil level, have a shop replace the timing chain, guides, tensioner and phasers as needed → Shop the timing chain tensioner at Amazon → Shop the timing chain guide at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Nissan manual is on Nissan's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Nissan SUV Rogue problems

See all Nissan Rogue codes & guides →