Nissan SUV Rogue Oil consumption

What this problem usually means

The 2014-2021 Rogue's 2.5L QR25DE consumes oil at a rate that surprises owners - about 1 quart per 2,000-3,000 miles is common on higher-mileage engines - because of its low-tension piston rings. Owners who do not check the oil between changes can let the level drop dangerously low, which then accelerates timing chain wear because the hydraulic tensioner relies on oil pressure.

Likely causes

  1. low-tension piston rings passing oil → Shop the piston rings at Amazon
  2. oil level falling between changes and starving the timing chain tensioner

How to fix it — step by step

  1. Check the oil level every fuel stop and keep a dated log of level against mileage
  2. Top up only with the specified oil and shorten the oil change interval to 5,000 miles at most
  3. Have the PCV valve and valve stem seals checked as part of a consumption diagnosis → Shop the pcv valve at Amazon
  4. Have a shop run an oil consumption test and assess piston ring wear if consumption is excessive

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Nissan manual is on Nissan's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Nissan SUV Rogue problems

See all Nissan Rogue codes & guides →