Nissan SUV Rogue Catalytic converter failure
What this problem usually means
The Rogue's catalytic converter can fail internally at higher mileage, setting code P0420 (and sometimes P0430). The QR25DE and VC-Turbo engines foul the converter over time, especially when the engine has been burning oil, which coats the catalyst substrate with oil ash, or when misfires send unburned fuel into the exhaust.
Likely causes
- catalyst substrate fouled by oil ash from oil consumption
- misfires sending unburned fuel into the exhaust
How to fix it — step by step
- Scan for code P0420 or P0430 and record any misfire or oil consumption issues at the same time
- Fix the engine problem that fouled the converter first - a new converter on an oil-burning engine will fail again
- Have a shop confirm converter efficiency with live oxygen sensor data before replacing it → Shop the oxygen sensor at Amazon
- Replace the catalytic converter once the root cause is repaired → Shop the catalytic converter at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the catalytic converter.
Shop the catalytic converter at Amazon
Also tied to this fault: oxygen sensor - Shop at Amazon
Parts that commonly fix it
- catalytic converter - Shop at Amazon
- oxygen sensor - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Nissan manual is on Nissan's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.