Mitsubishi SUV Eclipse Cross Timing chain stretch and cold-start rattle
What this problem usually means
The Eclipse Cross's 1.5L turbo (4B40) stretches its timing chain from around 100,000 miles - a cold-start rattle that fades as the engine warms is the warning sign, per the what-breaks buying guide. A jumped chain means valve-to-piston contact and a dead engine.
Likely causes
- Timing chain stretch → Shop the timing chain kit at Amazon
- Worn chain guides/tensioner
- Long oil change intervals
How to fix it — step by step
- Listen on a cold start for rattle lasting more than 2-3 seconds
- Check oil level and service history - stretched chains follow neglected oil
- Have timing correlation codes read if the light comes on
- Replace the chain set before it jumps; budget for guides and tensioner at the same time
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the timing chain kit.
Parts that commonly fix it
- timing chain kit - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.